Product details

Application scenario of car wash platform:

Engineering car washing machine for engineering transport vehicles flushing requirements design, the vehicle chassis, tires and other parts of the high pressure washing, to achieve the cleaning effect of mechanical equipment. Suitable for construction site, garbage disposal site, quarry, cargo transfer field and other places that can pollute the road, its own load can reach 200T, fully automatic cleaning, to ensure the washing effect, improve the washing efficiency. Project car washing machine is a new type of vehicle washing equipment, extensive coverage, more and more sites have been installed project car washing machine.

Introduction of car washing station:
The main body of the washing turbine is concave as a whole, covered with water nozzle on both sides and bottom surface. As long as there are vehicles passing through from above, the machine automatically starts to act. The nozzle ejects water of up to 4kg-5kg/cm2 from different angles, covering the side and bottom of the whole vehicle. You can clean the whole thing. The height and length of both sides vary with the change of the model, the number of sprinkler heads is not the same, similarly, the length and width of the bottom also vary with the change of the model, in addition, the bottom in addition to the model, the structure of the foundation type and the free foundation type is also different.

Advantages of car washing table:
The washing turbine chassis is welded with hot-dip galvanized round pipe and hot-dip galvanized square pipe. It has anti-corrosion and anti-rust ability and is suitable for long-term use in fixed places. The universal joint nozzle can be rotated, and the nozzle can be rotated and washed by high pressure water pump, which can realize no all-round spray brush, and it is easier to wash away the sediment adhesion on the vehicle tire; According to the sediment of the vehicle chassis is difficult to wash the characteristics of the car washing machine at the bottom of the installation of hidden sprinkler, the bottom of the passing vehicle washing.
Optional car washing machine: monitoring computer, license plate recognition system: automatic vehicle identification system and electronic display are set at the entrance of the washing turbine to record the passing vehicle information of each period, and the control room is equipped with a monitoring computer, using the data line connection and vehicle identification system connection, can be played back at any time, view the passing vehicle information of each period.
The bottom steel plate and civil construction design is reasonable, smooth drainage, avoid the bottom of the car washing machine drainage blockage.
A water shaking platform is designed at the exit, and air drying fans are installed on both sides. After the vehicle is washed, the fans will automatically start to blow off the water passing through the vehicle, so as to avoid secondary pollution caused by the water on the vehicle to the clean ground outside the car washing machine during the driving process. Ensure that the vehicle is not contaminated with dirt and dust after washing, and do not cause two dust in the driving.

Working principle:
Automatic flushing equipment has two modes: automatic operation and manual operation
Standby state: Set the 3P circuit breaker in the control box of the automatic flushing equipment to the ON position, the working indicator will light up, and the system will start and enter the standby state.
Washing operation: The vehicle slowly passes through the washing turbine chassis at the speed of 3km/ h. When the front wheel touches the switch pedal or presses the remote control start button, the water pump starts and the working water flows through the nozzles of both sides of the nozzle and the chassis spray holes to wash the front, back, left, right and bottom of the body in all aspects. In the 40s range (adjustable from 0 to 60s) the water pump automatically stops and flushing is complete.

Basic parameters:

Video display